My guess is the EV...but I would wait to see what whitebroncoii says.
He knows way more about the new stuff.
There were a few Altecs with Gauss inside.
Hello,
Who know the reference speaker installs in ALTEC Acoustabass AB 2200 ?
http://www.altecpro.com/pdfs/vintage...r%20System.pdf
An Electrovoice DL12X ?
http://archives.telex.com/archives/E...L12X%20EDS.pdf
Your opinion
Best Regards
St?phane
My guess is the EV...but I would wait to see what whitebroncoii says.
He knows way more about the new stuff.
There were a few Altecs with Gauss inside.
Your neighbors called. They like your music.
The AB2200 was a relabeled Electro-Voice TL12-1E. It is loaded with an EV woofer developed specifically for this application. Performance can be described as a mid-bass product that does not have much output below 70Hz. You can download the TL12-1E data sheet at . . . http://archives.telex.com/archives/EV/Speakers/EDS/
Experience is Knowledge
Hi,
Thank you for your answers.
I went to the dealer this morning.
http://1.bp.blogspot.com/_-i1wjkiEGr...0/P1020346.JPG
http://1.bp.blogspot.com/_-i1wjkiEGr...0/P1020350.JPG
St?phane
I'd be concerned with the cabinet integrity, ALL of the mitered corners show fractures(or worse) in the paint, which likely is an indication of movement at the joint, probably from dry/humid cycles. These appear to be made of a composite similar to OSB which draws moisture like a sponge.
Not all vegetables make good leaders.
Hi,
I opened the boxes.
Some traces of moisture inside.
No marks on the paper cones of speakers.
St?phane
Hi,
The latest developments
http://2.bp.blogspot.com/_-i1wjkiEGr...0/P1020369.JPG
http://1.bp.blogspot.com/_-i1wjkiEGr...0/P1020370.JPG
http://1.bp.blogspot.com/_-i1wjkiEGr...0/P1020371.JPG
Altec AcoustaBass AB 2200
LF – 350hz/24db active cross-over
JBL 3732mhf
350hz/24db active cross-over – HF
JBL 2402h
7khz/6db passive cross-over - HF
St?phane
The EV model
http://www.hifido.jp/KWELECTRO+VOICE...7594-97654-00/
St?phane
Posting Permissions
Bookmarks